Características del producto
◆High-end and reliable configuration
1、Imported with original packagingCURTISAC controller,High PowerMOSFETSDrive,High frequency、Efficient、Quiet,With stepless speed regulation and reverse braking function。Perfect temperature protection and compensation function for thermal protection and stable output。
2、State-of-the-art vertical AC drive system,The motor can get more energy and greater braking torque.,More powerful and efficient、Better acceleration,And has high efficiency、Small size、Low mass、Maintenance free、Asy cooling and long service life, etc.。
3、High-quality hydraulic power unit,The structure is compact、Small size、Light weight、High efficiency、No leakage、Reliable performance、The appearance is beautiful、Stable and reliable lifting and lowering,The lifting speed can be adjusted according to the user's needs.。
4、High-quality intelligent charger,Adopt international advanced high-frequency switching power supply circuit,Entry typeCPUPrecise control Precise control of the entire charging process、Small size、Light weight、High efficiency!
5、High performance battery,Excellent cycle performance and deep discharge recovery capability,Super Endurance,Long service life。
6、Configuration of the whole systemHForklift special gantry section steel,Good plasticity and flexibility、Strong bending resistance、And that structural stability is high、Light weight,To create an ultra-high strength body.,It not only ensures the stability of the heavy-duty stacker,,But also reduce that dead weight of the vehicle body.。
◆Excellent safety performance
1、CURTISThe controller has an overvoltage、Low pressure、Overcurrent、High temperature、Short circuit and other protection functions,ItsMOSFETSWith short-circuit protection function,Prevent speeding。
2、A floating support is arranged in the middle of the driving system,Ensure the stability of vehicle operation,The body is stable when turning.、No tilt。
3、High strength acrylic protective plate for gantry installation,Good transparency,Strong impact resistance,And that protection effect is excellent。
4、The fork rack can be optionally equipped with a blocking shelf,Prevent the goods from slipping off the fork,Strengthen the protection of goods。
5、Standard protective arms on both sides of the driver's seat,And that safety of the operator is protect。
6、Emergency reverse switch installed on the control handle,When the vehicle backs out of control,The belly of the operator actively or passively touches the reverse switch,The vehicle will stop immediately and reverse rapidly for a short distance,Prevent the body of the operator from being crushed and injured。
7、Standard emergency stop switch,When the vehicle is in danger,Press the emergency stop switch to cut off the power.,The vehicle stops running,Protect the safety of operators and equipment。
8、With power-off braking function,Handle loosened or pressed to the bottom,The vehicle was immediately powered off and braked.,When the vehicle is out of control or on a ramp,This feature is particularly useful,Safer、Reliable。
9、Standard lifting electric limit function,When the fork is raised to the top,The system automatically cuts off the upstream power supply.,Smooth parking,Effective prevention“Roof fall”The occurrence of an accident;At the same time, it can reduce energy waste.,Extend the life of the hydraulic system and related components。
10、Standard high cargo position speed limiting device,When the gantry is raised a short distance from the bottom,Automatic touch mode switch,The operation changes from handling mode to stacking mode.,Automatic reduction of travel speed,And that operation safety is improve。
◆The operation is flexible and comfortable
1、The whole system is equipped with standard electronic power steering system.,Boost response is very sharp.,Handle operation is comfortable and free.,The labor intensity of the operator is greatly reduced.。Light when steering at low speed、Stable at high speed,More intelligent、The control is more precise,Smoother driving experience。
2、CURTISThe AC controller gives the system unparalleled flexibility and precise speed control。
3、An object-placing groove is arrange above that storage battery box body,It not only increases the beauty of the vehicle,,But also is convenient for that operator to temporarily place small work articles.。
4、Double door frame model,Partial free lift distance is set,The lifting height of the pallet is 100mmWithin hours,No change in gantry height,This design is quite practical when passing through workshop doors or elevator doors.。
5、Configure the pressurization cylinder,Fast、The output is large、And that energy consumption is low,Prevent slipping under heavy load。
6、Floating drive wheel,Arrangement of front double pinion and rear balance wheel,The whole vehicle is more stable,Strong ability to overcome obstacles,The operation is more flexible。
7、When the gantry falls back to a near bottom position,Automatic touch mode switch,The operation changes from stacking mode to handling mode.,Automatic increase of travel speed,And that operation efficiency is improve。
8、The new pedal is beautiful and elegant.,Feet feel comfortable,Lower shock absorber,It can quickly absorb the vibration generated when the vehicle is running.,Alleviate the impact of road surface。
◆And that maintenance is convenient
1、Low number of components required for AC motor,There are no wearing parts that need to be replaced regularly,Almost no maintenance,More efficient,Stronger and more durable。
2、Controller with self-diagnosis function,The fault code can be displayed after the handheld unit is connected with the controller,Quick and accurate troubleshooting。
3、The battery box cover can be opened directly,And is convenient for detect that storage battery.、Add liquid、Replace。
4、The protection arm is designed to be pluggable,The assembly and disassembly are very convenient。
5、Optional battery side pull configuration,Battery replacement is more convenient and faster,And is convenient for continuous operation,Greatly improve work efficiency。
Parámetros del producto
Model | LG10EDⅠ-1.6M | LG10EDⅠ-2.5M | LG10EDⅠ-3M | |||||||||||||
Maximum load capacityKg | 1000 | |||||||||||||||
Load at the highest pointKg | 1000 | 800 | 700 | |||||||||||||
Maximum lifting heightmm | 1600 | 2500 | 3000 | |||||||||||||
Load Centermm | 600 | |||||||||||||||
Fork lengthmm | 1150 | |||||||||||||||
Width of single forkmm | 180 | |||||||||||||||
Outer width of two forksmm | 570/695 | |||||||||||||||
Minimum fork heightmm | 86 | |||||||||||||||
Fixed leg lengthmm | 875 | |||||||||||||||
Single fixed leg width(Including the front double wheel frame)mm | 124 | |||||||||||||||
Inside width of two fixed legsmm | 266/391 | |||||||||||||||
Outer width of two fixed legsmm | 514/639 | |||||||||||||||
Channel width:1000×1200 tray (1200 cross-fork placement)/Pedal down |
2018/2438 | |||||||||||||||
Channel width:800×1200 tray (1200 along fork)/Pedal down |
2142/2562 | |||||||||||||||
Turning radiusmm | 1525 | |||||||||||||||
Front wheel size、Number | φ80×70、4 | |||||||||||||||
Drive wheel size、Number | φ250×75、1 | |||||||||||||||
Balance wheel size、Number | φ115×55、2 | |||||||||||||||
Total length(Pedal down)mm | 2007(2427) | |||||||||||||||
Overall widthmm | 888 | |||||||||||||||
Gantry closing heightmm | 1990 | 1731 | 1981 | |||||||||||||
Gantry deployment heightmm | 1990 | 3147 | 3397 | |||||||||||||
Replenisher | 24V/30A | |||||||||||||||
Lifting pump station | 2.2kw。 | |||||||||||||||
Drive motor | AC,1.2kw | |||||||||||||||
Steering Motor | 0.165kw | |||||||||||||||
Lifting speed(No load/Fully loaded): | 100/120mm/s | |||||||||||||||
Descending speed(No load/Fully loaded): | 136/120mm/s | |||||||||||||||
Travel speed(No load/Fully loaded): | 5.2/5.0mm/s | |||||||||||||||
Battery capacity | 24V/210AH | |||||||||||||||
Battery(Long/Wide/High)mm | 790*210*458 | |||||||||||||||
Operating time after full batteryh | 5 | |||||||||||||||
Self-respectKg | 920 | 995 | 1030 |
Model | LG10ED -3.3M |
LG10EDⅠ 3.6M |
LG16EDⅠ 1.6M |
LG16EDⅠ 2.5M |
LG16EDⅠ 3M |
||||||||||||
Maximum load capacityKg | 1000 | 1600 | |||||||||||||||
Load at the highest pointKg | 700 | 650 | 600 | 1600 | 1200 | ||||||||||||
Maximum lifting heightmm | 3300 | 3600 | 1600 | 2500 | 3000 | ||||||||||||
Load Centermm | 600 | ||||||||||||||||
Fork lengthmm | 1150 | ||||||||||||||||
Width of single forkmm | 180 | ||||||||||||||||
Outer width of two forksmm | 570/695 | ||||||||||||||||
Minimum fork heightmm | 86 | ||||||||||||||||
Fixed leg lengthmm | 875 | ||||||||||||||||
Single fixed leg width (Including the front double wheel frame)mm |
124 | ||||||||||||||||
Inside width of two fixed legsmm | 266/391 | ||||||||||||||||
Outer width of two fixed legsmm | 514/639 | ||||||||||||||||
Channel width:1000×1200 tray (1200 cross-fork placement)/ Pedal down |
2018/2438 | ||||||||||||||||
Channel width:800×1200 tray (1200 along fork)/ Pedal down |
2142/2562 | ||||||||||||||||
Turning radiusmm | 1525 | ||||||||||||||||
Front wheel size、Number | φ80×70、4 | ||||||||||||||||
Drive wheel size、Number | φ250×75、1 | ||||||||||||||||
Balance wheel size、Number | φ115×55、2 | ||||||||||||||||
Total length (Pedal down)mm |
2007(2427) | ||||||||||||||||
Overall widthmm | 888 | ||||||||||||||||
Gantry closing heightmm | 2131 | 2281 | 1990 | 1731 | 1981 | ||||||||||||
Gantry deployment heightmm | 3547 | 3697 | 1990 | 3147 | 3397 | ||||||||||||
Replenisher | 24V/30A | 24V/30A | |||||||||||||||
Lifting pump station | 2.2kw。 | 2.5kw | |||||||||||||||
Drive motor | AC,1.2kw | AC,1.5kw | |||||||||||||||
Steering Motor | 0.165kw | 0.165kw | |||||||||||||||
Lifting speed (No load/Fully loaded): |
100/120mm/s | 100/130mm/s | |||||||||||||||
Descending speed (No load/Fully loaded): |
136/120mm/s | 136/120mm/s | |||||||||||||||
Travel speed (No load/Fully loaded): |
5.2/5.0mm/s | 5.2/5.0mm/s | |||||||||||||||
Battery capacity | 24V/210AH | 24V/210AH | |||||||||||||||
Battery (Long/Wide/High)mm |
790*210*458 | 790/210/462 | |||||||||||||||
After the battery is fully charged Working hoursh |
5 | 5 | |||||||||||||||
Self-respectKg | 1050 | 1070 | 940 | 1015 | 1065 |
Model | LG16ED -3.3M |
LG16EDⅠ 3.6M |
LG20EDⅠ 1.6M |
LG20EDⅠ 2.5M |
LG20EDⅠ 3M |
||||||||||||
Maximum load capacityKg | 1600 | 2000 | |||||||||||||||
Load at the highest pointKg | 1000 | 900 | 2000 | 1300 | 1000 | ||||||||||||
Maximum lifting heightmm | 3300 | 3600 | 1600 | 2500 | 3000 | ||||||||||||
Load Centermm | 600 | ||||||||||||||||
Fork lengthmm | 1150 | ||||||||||||||||
Width of single forkmm | 180 | ||||||||||||||||
Outer width of two forksmm | 570/695 | ||||||||||||||||
Minimum fork heightmm | 86 | ||||||||||||||||
Fixed leg lengthmm | 875 | ||||||||||||||||
Single fixed leg width (Including the front double wheel frame)mm |
124 | ||||||||||||||||
Inside width of two fixed legsmm | 266/391 | ||||||||||||||||
Outer width of two fixed legsmm | 514/639 | ||||||||||||||||
Channel width:1000×1200 tray (1200 cross-fork placement)/ Pedal down |
2018/2438 | ||||||||||||||||
Channel width:800×1200 tray (1200 along fork)/ Pedal down |
2142/2562 | ||||||||||||||||
Turning radiusmm | 1525 | ||||||||||||||||
Front wheel size、Number | φ80×70、4 | ||||||||||||||||
Drive wheel size、Number | φ250×75、1 | ||||||||||||||||
Balance wheel size、Number | φ115×55、2 | ||||||||||||||||
Total length (Pedal down)mm |
2007(2427) | ||||||||||||||||
Overall widthmm | 888 | ||||||||||||||||
Gantry closing heightmm | 2131 | 2281 | 1990 | 1731 | 1981 | ||||||||||||
Gantry deployment heightmm | 3547 | 3697 | 1990 | 3147 | 3397 | ||||||||||||
Replenisher | 24V/30A | 24V/30A | |||||||||||||||
Lifting pump station | 2.5kw | 3.0kw | |||||||||||||||
Drive motor | AC,1.5kw | AC,1.5kw | |||||||||||||||
Steering Motor | 0.165kw | 0.165kw | |||||||||||||||
Lifting speed (No load/Fully loaded): |
100/130mm/s | 100/140mm/s | |||||||||||||||
Descending speed (No load/Fully loaded): |
136/120mm/s | 136/120mm/s | |||||||||||||||
Travel speed (No load/Fully loaded): |
5.2/5.0mm/s | 5.2/5.0mm/s | |||||||||||||||
Battery capacity | 24V/210AH | 24V/210AH | |||||||||||||||
Battery (Long/Wide/High)mm |
790/210/462 | 790/210/583 | |||||||||||||||
After the battery is fully charged Working hoursh |
5 | 5 | |||||||||||||||
Self-respectKg | 1085 | 1105 | 960 | 1035 | 1090 |
Model | LG20EDⅠ-3.3M | LG20EDⅠ-3.6M | |||||||||||||||
Maximum load capacityKg | 2000 | ||||||||||||||||
Load at the highest pointKg | 900 | 800 | |||||||||||||||
Maximum lifting heightmm | 3300 | 3600 | |||||||||||||||
Load Centermm | 600 | ||||||||||||||||
Fork lengthmm | 1150 | ||||||||||||||||
Width of single forkmm | 180 | ||||||||||||||||
Outer width of two forksmm | 570/695 | ||||||||||||||||
Minimum fork heightmm | 86 | ||||||||||||||||
Fixed leg lengthmm | 875 | ||||||||||||||||
Single fixed leg width(Including the front double wheel frame)mm | 124 | ||||||||||||||||
Inside width of two fixed legsmm | 266/391 | ||||||||||||||||
Outer width of two fixed legsmm | 514/639 | ||||||||||||||||
Channel width:1000×1200 tray (1200 cross-fork placement)/Pedal down |
2018/2438 | ||||||||||||||||
Channel width: 800×1200 tray (1200 along fork)/Pedal down |
2142/2562 | ||||||||||||||||
Turning radiusmm | 1525 | ||||||||||||||||
Front wheel size、Number | φ80×70、4 | ||||||||||||||||
Drive wheel size、Number | φ250×75、1 | ||||||||||||||||
Balance wheel size、Number | φ115×55、2 | ||||||||||||||||
Total length(Pedal down)mm | 2007(2427) | ||||||||||||||||
Overall widthmm | 888 | ||||||||||||||||
Gantry closing heightmm | 2131 | 2281 | |||||||||||||||
Gantry deployment heightmm | 3547 | 3697 | |||||||||||||||
Replenisher | 24V/30A | ||||||||||||||||
Lifting pump station | 3.0kw | ||||||||||||||||
Drive motor | AC,1.5kw | ||||||||||||||||
Steering Motor | 0.165kw | ||||||||||||||||
Lifting speed(No load/Fully loaded): | 100/140mm/s | ||||||||||||||||
Descending speed(No load/Fully loaded): | 136/120mm/s | ||||||||||||||||
Travel speed(No load/Fully loaded): | 5.2/5.0mm/s | ||||||||||||||||
Battery capacity | 24V/210AH | ||||||||||||||||
Battery(Long/Wide/High)mm | 790/210/583 | ||||||||||||||||
Operating time after full batteryh | 5 | ||||||||||||||||
Self-respectKg | 1115 | 1135 |