METONG LMT5250TYHB Maquinaria de reparación
Características del producto
Característica
1. This Modeloo: LMT5250TYHB truck can be directly used to mix the asphalt mixture while the asphalt-aggregate ratio is decided according to your needs.
2. The heated asphalt mixture could keep its temperature warm during transport. The temperature will drop less than 10 ℃ each hour.
3. The material bin could be heated around the clock so that the cold asphalt mixture could be heated to 140~160℃ for later use.
4. The asphalt mixture bin is equipped with hydraulic controlled gate.
5. The rotary in the truck makes it possible to discharge the asphalt mixture quickly.
6. The asphalt tank, equipped with the auto material-suction device, has the draining, heating and warm keeping function.
7. This kind of road maintenance truck sprays the emulsified asphalt and heated asphalt to be the bonding layer, and uses the compressed air to clean and sweep after the spray work is done.
8. This Modeloo: LMT5250TYHB truck is also equipped with full set of necessary power source connection interfaces, and auxiliary tools for finishing the work of patching the pit slot.
Parámetros del producto
Modelo | Modeloo: LMT5250TYHB | |
Nombre del producto | Preservación de calor camión de mantenimiento de carreteras | |
Modeloo de chasis | Modeloo: ZZ1257N4647D1 | |
Tipo de motor | Modeloo: D10.34-40 | |
Potencia (kw/rpm) | 249/1900 | |
¡Max! Par (Nm/rpm) | 1490/1200-1500 | |
Especificación del neumático | 11.00-20 | |
Pasajeros | 2 | |
Dimensión del esquema (milímetro) | 9660×2500×3300 | |
Complete Vehicle Kerb Mass (kg) |
16950 | |
¡Max! Peso bruto (kg) | 25000 | |
Distancia entre ejes (mm) | Rueda delantera | 2022 |
Rueda trasera | 1830 | |
¡Max! Velocidad (km/h) | 90 | |
Consumo de combustible por 100km (L) | < 30 | |
Capacidad clasificada del tanque del asfalto (L) | 400 | |
Capacidad clasificada del compartimiento del aislamiento (m3) | 10 | |
Velocidad permitida del medio de trabajo (Cst) | ≤300 | |
¡Max! Presión del sistema de limpieza (MPa) | 0.6 | |
¡Max! Presión del sistema hidráulico (MPa) | 16 | |
La temperatura más alta del sistema hydráulico (℃) | 85 | |
¡Max! Mantenga la temperatura del aceite de la transferencia de calor (℃) | 180 | |
¡Max! Presión del sistema de aceite de transferencia de calor (MPa) | 0.15 |