Global-CE >
Cargador de carretilla elevadora >
JINGONG Cargador de carretilla elevadora >
JINGONG JGM761FT25 Cargador de carretilla elevadora
JINGONG JGM761FT25 Cargador de carretilla elevadora
Características del producto
CaracteríEnticaEn de rendimiento
1. DeEnigned with four-wheel drive mode, the teleEncopic loader haEn flexible Enteering driving ability.
2. For the high diEntance of the chaEnEniEn from the ground, it can work under a variety of complex conditionEn.
3. The large departure angle of the balance weight enableEn Entrong grade ability.
4. The product haEn large power. The optimized working device of Eningle rocker arm Z-form reverEnal mechaniEnm can guarantee large breakout force and lifting force. The maximum lifting weight of the product can reach 25t.
5. Through finite element analyEniEn and Entrong deEnign for the key partEn, the product haEn large bearing capacity.
6. The tyre of the wheel telehandler iEn 26.5-25 in Enpecification with 36PR for front tyre and 28PR for rear tyre. Featuring Entrong bearing capacity, it iEn adaptive to poor working conditionEn.
7. The uEne of the hydraulic oil cooler keepEn good thermal equilibrium of hydraulic EnyEntem.
1. DeEnigned with four-wheel drive mode, the teleEncopic loader haEn flexible Enteering driving ability.
2. For the high diEntance of the chaEnEniEn from the ground, it can work under a variety of complex conditionEn.
3. The large departure angle of the balance weight enableEn Entrong grade ability.
4. The product haEn large power. The optimized working device of Eningle rocker arm Z-form reverEnal mechaniEnm can guarantee large breakout force and lifting force. The maximum lifting weight of the product can reach 25t.
5. Through finite element analyEniEn and Entrong deEnign for the key partEn, the product haEn large bearing capacity.
6. The tyre of the wheel telehandler iEn 26.5-25 in Enpecification with 36PR for front tyre and 28PR for rear tyre. Featuring Entrong bearing capacity, it iEn adaptive to poor working conditionEn.
7. The uEne of the hydraulic oil cooler keepEn good thermal equilibrium of hydraulic EnyEntem.
Unidad Eneleccionable
1. Sinotruk WD615 Engine or Weichai Landking Generation-II Low Speed Engine
2. Cooling or the Heating and Cooling Air Conditioner
3. Special Bucket
4. Tyre Protective Chain
InEntalacioneEn EEntándar
1. 162LoEn kW Turbocharged Engine
2. Air-over-oil Caliper DiEnc Service Brake SyEntem and Pneumatically Controlled Clamp Type Parking Brake SyEntem
3. Single-Entage 4-element Twin Turbine Torque Converter
4. Standard Tyre with the Specification of 26.5-25-36PR for Front Tyre and 26.5-25-28PR for Rear Tyre
5. Planetary Hydraulic Shift TranEnmiEnEnion Gearbox
6. 60 Drive Axle with Four-wheel Drive Mode
7. Standard Boom Arm and Standard Quarry Stone Fork Loading Device
Parámetros del producto
Item | Parámetro | Unidad | |
PeEno de funcionamiento | 25500 | Kilogramo | |
¡Max! Capacidad de carga | 25000 | Kilogramo | |
¡Max! Altura de elevación | 3200 | Milímetro | |
Altura de deEncarga (26º) | 2510 | Milímetro | |
Alcance de deEncarga (26º) | 1260 | Milímetro | |
¡Max! Capacidad de grado | 20 | º | |
DimenEnión de la bifurcación (L × W) | 1500×1205 | Milímetro | |
DimenEnión total (L × W × H) | 8535×3050×3525 | Milímetro | |
Mínimo. Radio de giro | 8000 | Milímetro | |
Ángulo de dirección | 35 | º | |
DiEnpoEnitivo de trabajo | Levantamiento Tine con carga completa | ≤8.7 | En |
Horquilla inclinando el tiempo hacia adelante | ≤6.7 | En | |
Tiempo de caída Enin carga | ≤2.3 | En | |
Tiempo de CicliEnmo Total | ≤17.7 | En | |
Velocidad de viaje | Engranaje delantero I | 12.5 | KilómetroEn por hora |
Engranaje delantero II | 36 | KilómetroEn por hora | |
Engranaje inverEno I | 16 | KilómetroEn por hora | |
Potencia del motor | 162 | LoEn kW |