Centro de productos
Más productos
Global-CE > Carretilla elevadora > CASE Carretilla elevadora > CASE 588H Carretilla elevadora

Características del producto

With fast lifting speeds, roading speeds of up to 24 mph (38.6 km/h), lifting capacities of up to 8,000 lbs and a slew of unique features that keep loads level and operators comfortable, the high-performance, Tier 4 Final 588H forklift truly does raise the bar. Without a disruptive third mast, our wide-channel, dual-mast design gives it unmatched visibility. We’ve also maintained a low-profile hood with our Tier 4 Final engine for a clear view behind the machine. Even at top lift heights, a perforated steel canopy gives operators clear vision without the neck-straining need to lean forward. Productivity The CASE 586H and 588H increase productivity and efficiency with industry-leading lift speed and dependable, high-performing lift capacities. These rough terrain forklifts are able to operate in a variety of terrains with the optional 4 four-wheel drive and standard differential lock. No need to worry about your load, CASE offers maximum travel capabilities with their 60° of mast tilt and optional load control. If operating in tight areas is a concern, the 588H features a narrow zero-tail swing design, meaning if the rear tires clear it, the rear of the machine will as well. CASE rough terrain forklifts feature an industry standard ITA class 3 carriage and forks allowing a wide range of aftermarket attachments. Fuel Efficiency These forklifts feature a simple, cost-effective Tier 4 Final solution. The 74 horsepower, 3.4 liter FPT engine uses a Catalizador de oxidación diesel (DOC) to deliver a minimum of 5% better fuel efficiency than our previous models and faster response times while meeting current environmental standards. Comfort and Visibility Without a disruptive third mast, our wide-channel, dual-mast design gives the H Series unmatched visibility. A narrow operating console further help increase front view so operators can confidently secure materials and a low-profile hood provides a clear view behind the machine. The large operating platform provides ample room for any operator. Add the optional deluxe suspension and load control for a comfortable ride on any terrain. Serviceability From tool-free swing-out access doors and spin-on filters, to ground-level site gauges and grouped service points, you can do daily maintenance in a matter of minutes. It’s the easiest way to help you get the most performance and longest life out of your machine. Axles are also easily serviced without complete disassembly for easy upkeep. Base & Extended Warranty Coverage 1-Year/Unlimited-Hour Full-Coverage Base Limited Warranty 2-Year /2,000-Hour Extended Engine Warranty Engine Warranty - Warrants all internal, lubricated parts that are captured between the valve cover and oil pan, cylinder block and head, exhaust manifold, front cover and flywheel housing, turbocharger, engine oil cooler and water pump. Drive Train Warranty - Drive (flex) plates / flywheel, drive axle assembly, drive couplings, drive shafts / universal joints, final drive / planetary, hydraulic drive motor, hydraulic drive pump, hydraulic pump when used as a power source for drive pump or drive motor, propulsion planetary drive, pump drive coupling, pump drive gearbox, seals in idlers and rollers, swing reducer transmission, torque converter, track steering brakes and clutch, transfer gear group, transmission charge pump, transmission / transmission control valve, transmission electronic controller, trencher drive gearbox, turntable bearing / swing gear / hydraulic swivel, and wet brakes / wet clutch. Purchased Protection Purchased Protection Plan is an extension of the factory base and extended coverage available at an additional cost. Your CASE dealer can help you determine the plan that fits your needs. Plans are available up to six-years / 7,500 hours on CASE Forklift models. Please see your CASE dealer for limitations, exclusions, and confirmation of policies in effect. The CASE Warranty remains in effect during the Warranty Period if the owner performs the required maintenance at the recommended intervals outlined in the product’s operator’s manual and the unit is operated within its rated capacity. Genuine CASE service parts or CASE approved service parts that meet CASE specifications must be used for maintenance and repairs.

Parámetros del producto

Motor

  • FPT 3.4 L Diesel
  • EGR refrigerado
  • Catalizador de oxidación diesel
  • Filtro de aceite de motor de flujo completo
  • Filtro de aire: tipo seco reemplazable con sello radial
  • Radiador con botella de desaireación
  • Anticongelante a -34 ° F (-37 ° C)
  • Acelerador de pie
  • Cinturón autoajustable

Mástil

  • 15 pies estándar Mástil 1 120 kg (2,468 lb)
  • 22 pies estándar Mástil 1 444 kg (3,183 lb)

Hidráulica

  • Bomba de engranajes-24 gal/min @ 3,000 psi (91 L/min @ 207 bar)
  • Refrigerador de aceite hidráulico resistente
  • 7 micrones, filtro de aceite giratorio

Entorno del operador

  • Toldo de protección certificado ROPS/FOPS
  • 2 faros halógenos
  • 2 luces de trabajo halógenas traseras
  • Amplio paseo a través de la plataforma
  • Asiento de vinilo
  • Cinturón de seguridad de 2 pulgadas (51 mm)
  • Defensas delanteras moldeadas
  • Indicadores: Contador de horas, RPM del motor, Temperatura del refrigerante del motor, Temperatura del aceite de la transmisión, Temporizador de trabajo, Nivel de combustible
  • Luces de advertencia: Restricción del filtro de aire, Alternador, Arranque en frío, Presión del aceite del motor, Bypass del filtro de aceite hidráulico, Enganche del freno de estacionamiento, Temperatura del refrigerante del motor, Voltaje de la batería
  • Alarmas audibles: Temperatura del refrigerante, Presión del aceite del motor, Enganche del freno de estacionamiento, Temperatura del aceite del convertidor, Respaldo, Bocina

Tren de transmisión

  • Eje delantero, según lo seleccionado:
  • 2/4WD de alta resistencia fuera de borda de accionamiento planetario, con 19,5 L x 24 neumáticos
  • Rear axle: 2WD heavy-duty front axle with 12 L x 16.5 tires 4WD heavy-duty mechanically driven rear axle, with 12 L x 16.5 tires
  • Transmisión Synchromesh de la lanzadera del poder 4F-4R
  • Convertidor de par
  • Control eléctrico 4WD sobre la marcha
  • Control eléctrico de lanzadera F/R
  • Control eléctrico de bloqueo del diferencial, con activación por pulsador
  • Freno de estacionamiento, resorte aplicado, liberación hidráulica

Otros

  • Swing hacia fuera acceso del motor del panel lateral
  • Anclajes delanteros/traseros
  • Logos reflectantes
  • Solo toldo: 2 luces de conducción delanteras, 2 luces de trabajo halógenas traseras

Enviar consulta

Contacto con CASE
Me gustaría hacer una oferta.
ID de correo electrónico
Su país / Región Is
Por favor, elija
Nombre
Número de teléfono
- -
Submission
Contacto con CASE
Me gustaría hacer una oferta.
ID de correo electrónico
Su país / Región Is
Por favor, elija
Nombre
Número de teléfono
- -
Submission

Productos relacionados que pueden interesarle

Carretilla elevadora Marcas relacionadas

Declaración de derechos de autor © 2002-2024 global-ce.com