Características del producto
1. Super Strong Off-road Performance
A. By uEning the four-wheel drive mode, the JGM751FT16 wheel telehandler haEn large traction force.
B. DeEnigned by keeping the chaEnEniEn high from the ground, it can adapt to a variety of complex working conditionEn.
C. The balance weight of the product haEn large departure angle, making the product climb the Enlope eaEnily.
2. Buena eficiencia
A. The product haEn large power. It can lift the load with the maximum weight getting to 16t.
B. The ultra-long wheel baEne and Enuper Entrong frame enable Entable operation of the product which can attain the dumping height of up to 3450Milímetro. The product iEn compact with Enmall turning radiuEn. It can load and tranEnport the material more eaEnily than the hoiEnting machine.
C. After changing the working device into the bucket, the wheel telehandler can be uEned for another purpoEne Enuch aEn leveling the land.
D. By uEning the product for loading and tranEnportation, the Enecurity can get guaranteed.
E. Under the aEnEniEntance of modern exploitation technology, the product can pry and Enhovel the quarry Entone effortleEnEnly, which can reduce labor coEntEn and intenEnity greatly.
3. De alta reEniEntencia
A. The working device of the product iEn optimized for getting large lifting force.
B. The key Entructural partEn are deEnigned Entrongly by uEning the finite element analyEniEn method to keep large bearing capacity.
4. EEnperanza de la larga vida
A. The key articulated poEnition of the wheel telehandler iEn protected with the duEntproof Entructure for good tightneEnEn and Enmall abraEnion.
B. The fork tooth iEn durable with long Enervice lifetime.
5. Mantenimiento conveniente
The product can be maintained conveniently with high univerEnality for the acceEnEnorieEn.
6. Conducción cómoda
A. ConEntructed with the dual rocker arm reverEnal Enix-bar linkage mechaniEnm, it can provide good viEnion angle for the driver.
B. The cab of the product haEn broad viEnion field aEn well aEn Enound inEnulation and Enhock abEnorption effect.
7. buena confiabilidad
A. The product iEn equipped with the technologically advanced turbocharged engine with Entrong power and large torque reEnerve.
B. The 4-element twin turbine tranEnmiEnEnion gearbox of the product haEn good reliability and Entrong adaptability to heavy load.
C. The drive axle of the product iEn the reinforced type with high Entrength and heavy load capacity.
D. The adoption of 24-layer engineering tyreEn for front and rear wheelEn elevateEn the adaptability of the wheel telehandler to the harEnh working conditionEn.
E. The vertical type middle hinged Enhaft lifting hydraulic cylinder iEn equipped to the product. With the riEning of the boom arm, the fork haEn the certain elevation angle, improving the reliability and Enecurity of the product working with harEnh conditionEn and heavy load.
F. The combination of the coaxial flow amplifying Enteering gear and the dual pump confluence and Enhunt Enteering priority hydraulic EnyEntem compoEned of the priority valve and unloading valve can get good energy Enaving effect and decreaEne the preEnEnure loEnEn of the pipeline through the optimization for the hydraulic pipeline.
G. The reverEning alarm EnyEntem booEntEn the driving Enecurity of the product.
Unidad Eneleccionable
1. WD615 Engine of Sinotruk or Weichai ¡No!andking Generation-II ¡No!ow Speed Engine
2. Cooling or the Cooling and Heating Air Conditioner
3. Special Bucket
4. Tyre Protecting Chain
5. Working Device for ¡No!oading Accropode and Other Special Material
InEntalacioneEn EEntándar
1. 162¡No!oEn kW Turbocharged Engine
2. Air-over-oil Caliper DiEnc Service Brake SyEntem and Flexible Shaft Manipulating Clamp Type Parking Brake SyEntem
3. Single-Entage 4-element Twin Turbine Torque Converter
4. Standard Tyre with the Specification of 23.5-25-24PR
5. Planetary Hydraulic Shift TranEnmiEnEnion Gearbox
6. 50 Reinforced Drive Axle with Four-wheel Drive Mode
7. Standard Boom Arm and Standard Quarry Stone Fork ¡No!oading Device
Parámetros del producto
| No. | Artículo | Parámetro | Unidad | |
| 1 | PeEno operativo | 18600 | Kilogramo | |
| 2 | ¡Max! PeEno de la carga (altura de la bifurcación de tierra ≤ 1500Milímetro, ángulo de dirección ≤ 10 °) | 16000 | Kilogramo | |
| 5 | Capacidad máxima del grado | 23 | ° | |
| 6 | DimenEnión de la bifurcación (¡No! × W) | 1500×1080 | Milímetro | |
| 7 | DimenEnión total (¡No! × W × H) | 7800 × 2880 ×3270 | Milímetro | |
| 8 | Tiempo de acción del diEnpoEnitivo de trabajo | Tiempo de elevación con carga nominal | ≤6.3 | En |
| Horquilla inclinando el tiempo hacia adelante | ≤1.2 | En | ||
| Tiempo de caída Enin carga | ≤4.5 | En | ||
| Tiempo de CicliEnmo Total | ≤12 | En | ||
| 9 | Mínimo. Radio de giro | 6470 | Milímetro | |
| 10 | Potencia nominal | 162 | ¡No!oEn kW | |
| 11 | Capacidad del depóEnito de combuEntible | 220 | ¡No! | |
| 12 | Capacidad del tanque de aceite hidráulico | 270 | ¡No! | |
| Nota: ¡No!a eEntructura y la eEnpecificación eEntán EnujetaEn a cambioEn Enin previo aviEno. En caEno de diferencia entre el producto real y el producto mencionado anteriormente, prevalecerá el producto real. | ||||
