Atlas Copco LE/LT oil-lubricated aluminum piston compressors Compresor

LE/LT oil-lubricated aluminum piston compressors Contact Us Fiabilidad total Los compresores LE/LT son excepcionalmente fiables, con las temperaturas de funcionamiento más bajas de la industria, y ofrecen aire de calidad con un bajo arrastre de aceite. Construidos con materiales duraderos y de alta calidad, garantizan un rendimiento de calidad y una larga vida útil del producto Bajos costos de funcionamiento y fácil mantenimiento LE/LT ofrecen bajos costos operativos y son fáciles de mantener, ya que los puntos de componentes y servicios son fácilmente accesibles Ahorre espacio en el piso Nuestro compresor LE/LT es ideal para clientes que tienen requisitos de espacio limitados. El bloque compresor, acoplado directamente al motor, se fabrica utilizando materiales ligeros con excelentes características de refrigeración LE oil-lubricated for single-stage compression The single-stage oil-lubricated reciprocating compressor allows filtered air to enter both cylinders through the inlet valve. The piston is driven forward through the connection rod attached to the balanced crankshaft. Maximum operating pressure is 10 bar (145psi) and capacities range from 3.4 up to 31.7 l/s at 50 Hz, 8.3 to 79.8 cfm at 60 Hz. Air compressed in the cylinders leaves through the outlet valve when the pressure reaches 10 bar (145psi). LT oil-lubricated for two-stage compression The LT two-stage oil-lubricated reciprocating compressor allows filtered air to enter only one cylinder. This low pressure cylinder feeds the second (high pressure) cylinder that can operate at a maximum pressure of 15, 20 or 30 bar (218, 290 or 435 psi) and with the following capacities:•15 bar (218 psi)from 3.1 to 11.7 l/s at 50 Hz, 7.6 to 23.1 cfm at 60 Hz.•20 bar (290 psi)from 2.1 to 18.0 l/s at 50 Hz, 5.7 to 44.3 cfm at 60 Hz.•30 bar (435 psi)from 2.5 to 17 l/s at 50 Hz, 6.6 to 41.7 cfm at 60 Hz.Compression temperature is decreased between the two stages for increased compression efficiency.